<img alt="" src="https://secure.leadforensics.com/239113.png" style="display:none;">

Bus duct is a type of electrical conduit that is used to distribute power to various electrical devices and systems within a building or facility. It consists of a series of conductors or 'buses' made of copper or Aluminum that run parallel to each other and are connected to a power source.

The buses are encased in a metal enclosure that is designed to protect the electrical connections and cables from damage and to provide easy access for maintenance and repairs. Bus ducts are commonly used in commercial and industrial settings, such as factories, office buildings, and airports, to distribute power to lights, motors, HVAC systems, and other electrical equipment.

Why is bus duct important for conducting electrical power?

Bus duct is important for several reasons:
  • Reliability: Bus duct provides a reliable and consistent source of power to electrical devices and systems, reducing the risk of power outages and equipment failures.
  • Safety: The metal enclosure of bus duct protects the electrical connections and cables from damage and prevents accidental electrical contact, making it safer for people and equipment.
  • Easy maintenance: Bus duct is designed for easy access and maintenance, which allows for quick repairs and replacement of components, reducing downtime and maintenance costs.
  • Space-saving: Bus duct takes up less space than traditional cable trays, making it an ideal solution for tight and confined spaces.
  • Flexibility: Bus duct can be easily reconfigured or expanded to accommodate changes in the electrical system, making it a flexible solution for different types of buildings and equipment.
  • Energy efficiency: It has the advantage of allowing better control of the power distribution which can avoid circuit overload and reduce energy consumption.

Overall, bus duct provides a safe, reliable, and efficient means of distributing power to electrical devices and systems, making it an essential component in commercial and industrial settings.
Why are bus duct joints considered the weak points?
  • Electrical connections are subject to wear and tear over time.
  • Vulnerable to environmental factors
  • Subjected to mechanical stress
  • Age - over time, the joints can become loose
  • Poor installation of the bus duct
bus-duct-joints-considered-weak-spots

Why are bus duct joints considered the weak points?

Bus duct is manufactured in short lengths (usually no more than 3m each) and connected on-site using bus duct joints. 

Electrical connections: The joints between the individual bus sections are where the electrical connections are made, and these connections are subject to wear and tear over time. This can cause resistance and arcing, which can lead to equipment failure and power outages.

Environmental factors: The joints are vulnerable to environmental factors such as moisture, dust, and temperature changes, which can cause corrosion and damage to the electrical connections. They are also heavy and over time, the effects of gravity put stress on the joints.

Mechanical stress: The joints are subjected to mechanical stress from the movement and vibration of the buses, which can cause wear and tear on the connections and the surrounding materials.

Age: Over time, the joints can become loose and the connections can become corroded, leading to a reduction in conductivity and power transfer.

Installation: Poor installation of the bus duct can lead to weak joints, which can cause problems in the future.

Regular inspection and maintenance of the bus duct joints can help to minimize these risks and ensure a reliable source of power. It's also important to use high-quality materials and proper installation techniques to reduce the likelihood of weak joints.

What happens when a bus duct joint fails?

When a bus duct joint fails, it's important to address the problem as soon as possible to minimize damage and avoid costly repairs and replacements. This can be done by shutting off the power to the affected bus, and then replacing or repairing the joint as needed. It's therefore important to have a regular maintenance program to detect any potential issues before they cause a failure.

When a bus duct joint fails, it's important to address the problem as soon as possible to minimize damage and avoid costly repairs and replacements

When a bus duct joint fails, several things can happen:

Power interruption: The electrical connections at the joint may become loose or corroded, causing a break in the power supply and power interruption to the devices and systems connected to that bus.

Equipment failure: The loss of power can cause equipment failure, potentially leading to costly repairs or replacement of the affected equipment.

Electrical arcing: The failed joint may also cause electrical arcing, generating heat and sparks, resulting in a fire hazard with the potential to damage to the surrounding equipment and structures.

Power quality issues: The failed joint can also lead to power quality issues, voltage fluctuations and harmonic distortion.

Prevent bus duct failures with thermal monitoring

Compromised joints will result in hotspots with the temperature rise in proportion to the severity of the fault. Thermal monitoring is therefore a useful tool for preventing bus duct failures by continuously monitoring the temperature of the bus duct, providing early warning of potential problems before they lead to failure.

Temperature monitoring: Thermal monitoring sensors installed directly onto bus duct will measure the temperature on the joints and indicate if there is a potential problem.

Temperature rise can be caused by a number of factors, such as a loose connection, a damaged bus, or an overloaded circuit.

Real-time monitoring: Thermal monitoring systems provide real-time data, which not only alerts operators to issues as they arise, but provides ‘big data’ for analysis by AI or Machine Learning, to inform a predictive maintenance model.

Remote monitoring: Thermal monitoring systems can be connected to a remote monitoring system (BMS / EPMS / SCADA), reducing the need for on-site maintenance staff.

Thermal monitoring is an important tool for preventing bus duct failures, by providing early warning signs of problems and allowing for prompt corrective action to be taken. It can minimize the risk of power interruption, equipment failure, and potentially hazardous hotspots.

Want to get condition monitoring tips, news and information straight to your inbox? Sign up here.

Get Exertherm news

How do thermal sensors detect potential failures in bus duct joints?

Thermal sensors can be used to maintain bus duct joints by monitoring the temperature of the bus ducts and providing early warning signs of potential problems. Here's how:

  • Temperature measurement: Thermal sensors can be installed on the bus ducts to measure the temperature of the buses and connections. If the temperature exceeds a certain threshold, it can indicate a problem, such as a loose connection or an overloaded circuit.
  • Temperature monitoring: Thermal sensors can also be used to continuously monitor the temperature of the bus ducts, providing real-time data that can be used to detect potential problems before they lead to failure.
  • Early warning: Thermal sensors can provide early warning of potential problems, allowing for prompt corrective action to be taken before a failure occurs.
  • Maintenance: Temperature data from thermal sensors can also be used to schedule regular maintenance on the bus ducts, such as tightening connections or replacing damaged components.
  • Alarm system: Thermal sensors can be connected to an alarm system that alerts the maintenance team when the temperature exceeds a certain threshold, ensuring that problems are addressed as soon as they are detected.

By monitoring the temperature of the bus ducts, thermal sensors provide early detection of potential problems and can help to maintain the integrity of the bus duct joints and prevent failures from occurring.